• Coverage: Approximately 18 square metres per litre with one coat
• No of Coats:2
• Drying Time: 12 hours
• Sizes: 750ml, 2.5 litre and 10 litre

• Coverage: Approximately 20 square metres per litre on new hardwoods. Much less on old dry softwoods
• No of Coats: 2 on new timber; 1 for recoat
• Drying time: 12 hours
• Sizes: 750ml and 2.5 litres. Some colours are available in 10 litres

Not suitable for use on horizontal surfaces such as timber decks.

The microporous surface allows the wood to breathe, thereby reducing swelling and shrinkage. The finish helps to slow the greying process on vertical surfaces.

The finish contains biocides, which are active ingredients helping to prevent mould, algae and fungal attack. As such, they should not be used internally, or externally on tables etc where food may be eaten, or timber decking which will be walked upon.

Available in 7 lightly tinted colour tones. A 2 coat application (or possibly 3 thin coats for softwoods or timbers in full exposed conditions). With the strength of the UV in New Zealand, the treated surface should be inspected regularly for fading, and maintenance undertaken where required. In most situations, the finish will last 12-18 months before recoat is required. Recoat is easy. Generally, a wash down and clean is all that is needed, followed by one rejuvenation coat once the timber is dry. Where the timber has been left to grey off, the wood will need rejuvenation with a product such as Osmo’s Wood Reviver Power Gel.

Note: UV Protection Oil Natural 429 is optimally balanced with white pigments to retain the natural character of light coloured timbers such as pine and oak. It is not recommended for use on darker timbers such as kwila or jarrah etc, as the white pigment may give the timber a chalky appearance. Applied to timber in full exposure, UV Natural will last approximately 4-6 months before recoat is required.

In all cases a trial test to determine suitability is recommended.

• Very water and dirt resistant
• Reduces wood swelling and shrinkage
• Resists growth of algae and mildew and resists fungal attack
• Microporous, breathable finish which does not crack, peel, flake or blister
• No sanding necessary for future applications
• Coverage: Approximately 18 square metres per litre with one coat
• No. of coats: 2
• Application temperature: +5°C to 35°C
• Drying time:  12 hours
• Sizes: 750ml and 2.5 litres.

• Coverage: Approximately 18 square metres per litre with one coat
• No of Coats:2
• Drying Time: 12 hours
• Sizes: 750ml, 2.5 litre and 10 litre

• Coverage: Approximately 20 square metres per litre on new hardwoods. Much less on old dry softwoods
• No of Coats: 2 on new timber; 1 for recoat
• Drying time: 12 hours
• Sizes: 750ml and 2.5 litres. Some colours are available in 10 litres

• Coverage: Approximately 18 square metres per litre with one coat
• No. of coats: 2
• Application temperature: +5°C to 35°C
• Drying time:  12 hours
• Sizes: 750ml and 2.5 litres.