Polyx®-Oil Anti Slip

• Slip resistance for added safety
• Suitable for public and commercial use
• Extremely durable and hardwearing
• Resistant to common liquid spills including water, juice, tea, coffee and wine
• Microporours breathable finish which does not crack, peel or flake
• Easily spot repaired.

• Coverage: Approximately 24 square metres per litre with one coat
• No of coats: 2
• Drying time: 8-10 hours
• Sizes: 750ml, 2.5 litres

Polyx®-Oil Anti-slip 3089 Extra is a clear, semi-matt (low sheen) finish oil for interior wooden floors, for use where an anti-slip finish is needed. It is a professional floor finish which is extremely tough, hard wearing and slip resistant. The oil contains fine, compressed organic particles, which are evenly dispersed within the finish, providing an anti-slip surface when cured. It can be used anywhere normal OSMO Polyx®-Oil can be used. It is especially recommended for use on wooden stair treads, and areas that are constantly wet, such as timber bathroom and laundry floors. Also suited for use in commercial areas such as cafes and restaurants and timber flooring in rest homes for the elderly.

Polyx®-Oil Anti-slip has been tested in NZ by Opus Laboratories for its anti-slip effectiveness. (Opus Laboratories also conduct testing for BRANZ). When applied correctly, and fully cured, the product has an anti slip rating of R11 which exceeds the requirements of the NZ Building Code. A copy of the test certificate can be supplied upon request.

Not recommended for use on oily and resinous timbers such as Matai, Heart Rimu, Totara, Kwila and Spotted Gum.

Easy to apply. Do not sand between coats, as this will remove the anti-slip particles in the oil. Osmo's 220mm floor brush with system handle is the recommended applicator. (The use of a roller is not recommended for applying this product).

(Please note that Polyx®-Oil Anti-slip 3088 has an anti slip rating of R9, which does not meet the requirements of the NZ Building Code, and as such is not available in New Zealand).